You have no items in your shopping cart.
N-500
Quick Overview
N-500(DE SAVER)
N-500(DE SAVER)
No Pilot Flame.
DE Saver is the product featuring "COST-DOWN" "SAFETY"
and "EASY OPERATION" for gas welding and gas brazing
operation.
(Valveless torch is optional)
Using DE Saver, what an operator has to do is only to ignite the torch at beginning of gas welding or brazing operation and to hang it to the hanger for extinguishing the torch after the operation. There are no troublesome valve adjustments of the torch. The ignition to the torch can be done by only spark igniter and saves the gas consumption.
The gas discharge will stop within 2.0 seconds, when the torch fall off from the hanger or the device falls down caused by emergency disasters such as an earthquake or an accident. Moreover, the gas discharge will also inevitably stop, when a power supply is cut off. Then after an electric power is restored, the gas does not discharged, as the solenoid valves are locked with "FULL INTERLOCK" system.
Because of no pilot flame, there is no choke at pilot nozzle and the ignition method is spark, there is no influence by fan or spot cooler.
Specification | |
Weight |
Write Your Own Review
You may also be interested in the following product(s)
-
DM-500 Co2/Mag welding machine
CO2/MAG Welding Machine, pursuing Higher Quality and Efficiency
-
WT Blue torch II series CO2/MAG Handheld welding torch
Blue torch II series, CO2/MAG Handheld welding torch ()
-
DL-350II CO2/MAG Digital Inverter Welding Machine
CO2/MAG Digital Inverter Welding Machine
-
FD-A20 with Trumpf TruDisk 1000/2000/3000/5000 series for Laser Welding/Cutting
High-accuracy robot set for Laser Welding/Cutting
-
WB-M350L CO2/MAG/MIG welding machine (Low spatter)
High speed Advanced Model with available modes: Low-spatter CO2/MAG, Low-spatter SUS MIG and CO2 (cored).