You have no items in your shopping cart.
V. Auto Tank
Quick Overview
As Vapour Flux is supplied from supplementary tank as much as it is used. Level of Vapour Flux is kept fixed level always
V. Auto Tank
As Vapour Flux is supplied from supplementary tank as much as it is used. Level of Vapour Flux is kept fixed level always.
Level is kept fixed by controlling 2 pcs. of valves which are attached between supplementary tank and Vapour Tank. Valve control is operated with built-in control unit. One cycle operation of valve can supply about 100cc of Vapour Flux into Vapour Tank. If the temperature is less likely to vaporize flux low, it is also possible to use put a hot water around the tank. (High water type) ※ The photo will be high water type.
SPECIAL FEATURES
・Since stable Vapour Flux evaporation can be obtained with Vapour Flux fixed level function, heating conditions are stable and good brazing can be performed.
・Since sensor is not used, there is no adjustment place.
・As quantity of Vapour Flux can be kept a little in Vapour Tank, staying Vapour Flux is decreased in Vapour Tank. Therefore, aging of Vapour Flux can be prevented and stable evaporation can be obtained.
・Between Vapour Tank and supplementary tank is cut off always with 2 pcs. of valve controls, there is no way that Vapour Flux in Vapour Tank flows backward to supplementary tank.
・It is not necessary to add Vapour Flux during operation, since supplementary tank has large capacity.
・As Vapour Tank and supplementary tank are made of stainless steel, aging Vapour Flux is prevented and it is economical.
・Maximum used quantity of Vapour Flux per hour can be selected with switch, however, under maximum quantity, it corresponds automatically according to used quantity.
・Remained quantity of Vapour Flux in supplementary tank can be seen with level gauge easily.
・ON/OFF control signals from outside can be input.
Specification | |
Weight |
Write Your Own Review
You may also be interested in the following product(s)
-
WB-M350L CO2/MAG/MIG welding machine (Low spatter)
High speed Advanced Model with available modes: Low-spatter CO2/MAG, Low-spatter SUS MIG and CO2 (cored).
-
WTA Blue torch II series MIG Handheld welding torch
Blue torch II series, MIG Handheld welding torch
-
FD-V8L-D12000 Plasma Cutting Robot (Long-arm)
Cutting Robot Set (Long-arm), 6 Axis with air plasma cutting machine D-12000 (120A)
-
LD-105/130CT Mobile Robot with Cart Transporter
(AGV) Automated Guided Vehicle / (AIV) Autonomous Intelligent Vehicle
-
Robot Cell
Pre-engineered and assembled robot cell delivers safe, efficient and flexible welding